S2624-4X L3 Managed switch, with 24*1GE Base-T，4*10GE uplinks, Smart Fan

  • 24*10/100/1000M Base-T, 4*1000M Base-X/10GE SFP+
  • Single Power Supply
  • Smart Fan

Highlight Features:

  1. QinQ
  2. LAG
  3. MSTP
  4. OSPF
  5. Layer 3 Basic-function

Application Scenarios:

  1. Telecommunication Operators Networks
  2. Enterprise /Campus Networks
Categories: ,
Get a quote  
  • Previous Product
  • S2648-6X L3 Managed switch, with 48*1G Base-T，6*10GE uplink, Dual Power(fixed), Smart Fan
  • Next Product
  • S3508-4X L3 Managed Switch, with 8*2.5G BASE-T and 4*10G SFP+ Uplinks

Description

OVERVIEW

The S2600 series switch is a layer 3 Ethernet switch, which can meet the needs of cost-effective Gigabit access and 10 Gigabit uplink for enterprise networks and operator customers.S2600 uses a high-performance low-power network processor, provides Gigabit line-speed forwarding performance, supports green Ethernet line sleep capability, has the lowest power consumption of the same-level equipment in the industry, supports powerful QoS and ACL functions, and supports IP+MAC+ Security features such as port binding support service flow classification and packet priority marking. Support static data packet sampling, SFLOW function, support multi-port mirroring analysis function, support static and flexible QinQ function, support Ethernet OAM 802.3ag (CFM), 802.3ah (EFM), support strategy-based IPV4/6 unicast routing, support Flexible forwarding strategy.

     

Product Feature:   

Carrier-level  equipment stability

Based on Linux operating system，support IPv4/IPv6 dual protocol stack platform

Support multiple link redundancy and network redundancy protocols such as STP/RSTP/MSTP/ERPS/LACP

Perfect safety mechanism

Support ACL security filtering mechanism, which can provide security control functions based on MAC, IP, L4 port

Support ARP attack automatic protection and user blocking functions

Support DHCP attack automatic protection based on Mac Address and user blocking functions

Support DDOS and virus attack protection

Support DHCP-snooping/IP-source-Guard/802.1X and other security features

Support link protection functions such as BFD, FlexLink, LACP and ERRP

Support remote loop detection function

Support CFM、EFM

Support remote user authentication based on Tacacs+, Radius, and Local user authentication

Powerful QoS capabilities

Support port speed and flow speed limit function

Support classification based on service flow and Qos flow control function

Support queue scheduling algorithms such as SP/WRR/SP+WRR

Support port-based and service flow-based mirroring functions

Enhanced multi-service capabilities

Support DHCP Server and DHCP Relay

Support L2-Tunnel

Support Ethernet OAM protocol such as CFM、EFM

Rich routing protocol

Support static route

Support dynamic route such as RIP, OSPF,BGP, ISIS

Support IPV4/IPV6 dual protocol stack，Support RIPng、OSPFv3

Simple and easy-to-use network management function

Support CLI based on RS232 serial port, Telnet and SSHv2

Support WEB-based configure operation management, support SNMP V1/V2/V3

Support remote upgrade or equipment through FTP and TFTP

Datasheet

CHARACTERISTICS

1. Basic
Product Name S2648-6X S2624-4X
Product Positioning Enterprise / Metro / HCI (Hyper-Converged Infrastructure) network access or aggregation
Switching Method Store and Forwarding / Cut Through
Packet Buffer 16Mbit 12Mbit
CPU Model/ Frequency SOC(MIPS-Dual Core Up to 1GHz) SOC(MIPS-34Kc Up to 800MHz)
Flash 32MB(FLASH)
Memory 512MB(DDR3)
Hardware Configuration Main Board Spec 48*10/100/1000M Base-T
6*1000M Base-X SFP/10GE SFP+		 24*10/100/1000M Base-T
4*1000M Base-X SFP/10GE SFP+
Console Type RJ45
Outband Eth Management Port Support
Inband Eth Management Port Support
2. Performance Spec
Switching Capacity Switching Capability 216 Gbps 128 Gbps
Throughput 160.704 Mpps 95.232 Mpps
Latency Min: 660ns
3. Hardware and Software Description
Hardware Summary Standard 1U 19” Rack Mountable
48*10/100/1000M Base-T
6*1000M Base-X SFP/10GE SFP+		 Standard 1U 19” Rack Mountable
24*10/100/1000M Base-T
4*1000M Base-X SFP/10GE SFP+
Software Upgrade Method TFTP/FTP
Service interruption time when reboot system for software update Less Than 120s
4. The Power Supply and Power Requirements
Type of Power Supply AC Support
DC Support
Power Supply Range AC Operating Voltage: 100 ~ 240V; 50/60Hz
Maximum Voltage: 90 ~ 264V; 47~63Hz
DC Operating Voltage: -48V ~ -75V
Double Power Input Support(Fixed) NO Support
Max Power Draw 53W 22W
5. Overcurrent and overvoltage protection
Overcurrent/Overvoltage Protection Yes
Surge Protection Level 2 KV
6. Others
Hardware Size (H×W×D) in. 440 x 290 x 44mm 440 x 210 x 44mm
Weight (kg) 5kg 3kg
Cooling Mode Fan Cooling (Front-to-Rear Airflow)
Quantity of Fans 2 1
Fan Module Pluggable Not support (Fixed fan)
Not Support (Fixed Fan)
Fan Module Intelligent Speed Control NO Support
Support
Operating Temperature Range -10℃～55℃

 

SOFTWARE FEATURE LIST

Tips ：● Support  ○ Unsupport

Feature List
Feature Description S2624-4X S2648-6X
Type Sub Type Feature
Ethernet basic features Ethernet Interface Ethernet interface operating modes(full duplex, half duplex, and auto-negotiation) ● ●
Ethernet interface operating rates ● ●
Jumbo Frame ● ●
Port enable/disable ● ●
Flow-control Flow-control tx/rx ● ●
Storm-control Port based storm-control ● ●
Unknow-unicast/unknow-multicast/broadcast storm-control ● ●
Port-isolate Port-isolate ● ●
Forward mode Store-and-forward ● ●
Cut-through ● ●
VLAN VLAN Access mode Access/Trunk/Hybrid ● ●
Default VLAN ● ●
VLAN Classification VLAN Classification(port based/mac based/ip based/protocal based) ● ●
QinQ Basic QinQ ● ●
Flexible QinQ ● ●
VLAN Swap ● ●
MAC MAC Address Table Automatic learning and aging of MAC addresses ● ●
Hardware Learning ● ●
Static and dynamic  MAC address entries ● ●
blackhole MAC ● ●
LAG Link aggregation Static-LAG & LACP ● ●
LAG load balance（SIP/DIP/SMAC/DMAC） ● ●
Ethernet Ring protection features STP STP Spanning-Tree Protocol ● ●
RSTP Rapid Spanning-Tree Protocol ● ●
MSTP Multi-instance Spanning-Tree Protocol ● ●
Spanning-Tree Protocol Protection BPDU Filter/Guard ● ●
Root Guard ● ●
Loop Guard ● ●
ERPS ERPS Single Ring ● ●
Sub Ring ● ●
Loopback Detect Loopback Detect Loopback-detection ● ●
Layer2 Multicast Layer2 Multicast IGMP Snooping IGMPv1/v2/v3 Snooping ● ●
Fast leave ● ●
Static IGMP snooping group ● ●
MVR MVR（Multicast VLAN Registration） ● ●
IPv4 Forwarding ARP ARP Static and dynamic ARP entries ● ●
Aging of ARP entries ● ●
Gratuitous ARP ● ●
ARP proxy basic ARP-Proxy ● ●
local ARP-Proxy ● ●
IPv4 Unicast Routing IPv4 Static Routes IPv4 Static Routes ● ●
uRPF uRPF check ● ●
RIP RIPv1/v2 ○ ●
OSPFv2 OSPFv2 ○ ●
IS-IS IS-IS ○ ●
BGP BGP ● ●
ICMP ICMP redirect ● ●
ICMP unreachables ● ●
ECMP ECMP ● ●
IPv4 Multicast Routing IGMP IGMPv1/v2/v3 ● ●
IGMP-Proxy ● ●
IGMP SSM Mapping ● ●
PIM PIM-SM ● ●
PIM-SSM ● ●
PIM-DM ● ●
IPv6 Forwarding IPv6 Basic Protocol ICMPv6 ICMPv6 ● ●
NDP NDP ● ●
PMTU PMTU ● ●
IPv6 Unicast Routing IPv6 Static Routes IPv6 Static Routes ● ●
RIPng RIPng ● ●
BGP4+ BGP4+ ● ●
OSPFv3 OSPFv3 ● ●
IS-IS IS-IS ● ●
IPv6 Multicast Routing MLD v1/v2 MLD v1/v2 ● ●
MLD v1/v2 Snooping MLD v1/v2 Snooping ● ●
Reliability BFD BFD BFD for OSPFv2 ● ●
VRRP VRRP VRRP ● ●
Track for VRRP ● ●
Smart Link FlexLink FlexLink ● ●
Monitorlink Monitorlink ● ●
ethernet OAM EFM EFM (802.3ah) Auto detection ● ●
Network fault detetion ● ●
Network fault handle ● ●
remote loopback ● ●
CFM CFM (802.1ag) Hardware CCM detect ● ●
MAC Ping ● ●
MAC Trace ● ●
Y.1731 Y.1731 Latency and jitter measure ● ●
QoS features QoS Traffic classification Traffic classification based on COS/DSCP (simple classification) ● ●
Traffic classification based on ACL ( complex classification) ● ●
Traffic classification based on inner header of the tunnel packets ● ●
Traffic behaviors Queue scheduling ● ●
Remark the priority fields(COS/DSCP) of the packet based on ACL ● ●
Flow redirection ● ●
Flow mirror ● ●
Traffic policing Traffic policing based on direction(in/out)  of Port ● ●
Traffic policing based on direction(in/out) of VLAN ● ●
Traffic policing based on direction(in/out) of flow ● ●
Traffic policing based on direction(in/out) of aggregated flow ● ●
Traffic shaping Queue based traffic shaping ● ●
Port based traffic shaping ● ●
Congestion management SP（Strict Priority）scheduling ● ●
WRR（Weighted Round Robin）scheduling ● ●
SP + WRR mixed scheduling ● ●
Traffic statistics Packet counts and bytes statistics based on traffic classification ● ●
Packet counts and bytes statistics based on the color after traffic policing ● ●
Forwarded and discarded packet counts and bytes statistics ● ●
Security and management System Security SSH SSHv1/v2 ● ●
RADIUS RADIUS ● ●
TACACS+ TACACS+ ● ●
AAA Authentication ● ●
Accounting ● ●
Dot1x Port based dot1x ● ●
MAC based dot1x ● ●
ACL MAC/IP ACL ● ●
Basic Mode ACL ● ●
Port/VLAN/L4-Port ACL ● ●
Time Range ● ●
ARP Inspection ARP Inspection ● ●
IP Source Guard IP Source Guard ● ●
Port Security Limitation on MAC address learning on interface ● ●
VLAN Security Limitation on MAC address learning on VLAN ● ●
Rate limit Rate limit ● ●
CPU Traffic Limit CPU Traffic Limit ● ●
Prevent DDOS attack Prevent DDOS attack (ICMP Flood/Smurf/Fraggle/LAND/SYN Flood) ● ●
Login filter CLI/WEB/SNMP/Telnet/SSH filtering ● ●
Network Management DHCP DHCP Server ● ●
DHCP Relay ● ●
DHCP Snooping ● ●
DHCP Option60 ● ●
DHCP Option82 ● ●
RMON RMON ● ●
sFlow RFC3176 sFlow ● ●
SNTP SNTP（Simple Network Time Protocol） ● ●
LLDP LLDP ● ●
Configuration and maintenance Terminal Services Command Line Interface Configurations through CLI (Command Line Interface) ● ●
Help information Help information in English ● ●
Terminal service Vty Terminal service ● ●
Console Terminal service ● ●
Configuration Management Management interface Inband management interface and configuration ● ●
Outband management interface and configuration ● ●
User privilege management privileged user proirity and privileged commands ● ●
SNMP Network management based on SNMPv1/v2c/v3 ● ●
Public and private MIB ● ●
Public and private Trap ● ●
WEB Configuration and management based on WEB UI ● ●
Restore factory default configuration Restore factory default configuration ● ●
File System File system File system ● ●
Upload and download Upload and download files through FTP or TFTP ● ●
Upload and download files through Xmodem ● ●
Debugging And Maintenance Debug per-module Debug features ● ●
ICMP Debug ● ●
Log & Alarm CPU usage display and  alarm ● ●
Memory  usage display and  alarm ● ●
Device temperature、PSU、FAN、status display and alarm ● ●
User operation logs ● ●
Management of logs, alarms, and debugging information ● ●
VCT VCT（Virtual Cable Test） ● ●
system diagnostics Detailed Diagnostic-information collection ● ●
Reboot Manual reboot ● ●
Schedule Reboot ● ●
Reboot Information logging ● ●
Network diagnostics Ping ● ●
IPv6 Ping ● ●
Traceroute ● ●
Mirror Port mirror ● ●
Flow mirror ● ●
Remote mirror ● ●
Multi-destination mirror（m:n） ● ●
CPU statistics To CPU/From CPU packets statistics ● ●
Loopback port loopback ● ●
hardware loopback（internal/external） ● ●
System time Time configuration ● ●
Timezone ● ●
Version Upgrade System soft ware upgrade upgrade with the local image file ● ●
upgrade with the remote TFTP server ● ●
Uboot upgrade Online upgrade Uboot ● ●

 

Performance & Spec Table
Class Feature Sub Spec S2624-4X S2648-6X
Ethernet Basic Jumbo frame Maximum Jumbo frame size 12288
Switching Capacity Switching Capability 128 Gbps 216 Gbps
Throughput 95.232 Mpps 160.704 Mpps
Latency Min: 660ns
MAC MAC address Capacity 16K 32K
MAC Learning Rate (HW) Line Rate Line Rate
Multicast MAC Multicast MAC address Capacity 1023 4095
VLAN VLAN IDs 4094
MAC-VLAN Capacity 1K 2K
IP-subnet-vlan Capacity 1K 2K
Protocol-VLAN Capacity 8
VLAN Swap Capacity 1K 2K
Link Aggregation
(Static&LACP)		 Maximum Member Num per group 8
Maximum Group Num 64 128
Load balance policy Dst-ip/Src-IP/Dst-MAC/Src-MAC
Convergence time < 50ms
Port-isolate Port-isolate Group Num 4
Ethernet Ring protection STP Convergence time < 30s
RSTP Convergence time < 1s
MSTP Instance Num 16
Convergence time < 1s
ERPS(G.8032) Rings 239
Switchover time < 50 ms
Ethernet OAM CFM(802.1ag) Maximum Session Num 48
Maximum domain Num 8
CCM Interval Types 4
Maximum Down MEP Num 8191
Maximum Up MEP Num 8191
IPv4 unicast ARP ARP Capacity 6K 12K
IPv4 LPM 512 12K
IPv4 multicast IGMP Snooping Maximum Groups Num 1K 4K
IPv6 unicast Host Route NDP Capacity 3K 12K
IPv6 LPMv6 128 12K
QACL Per-port Queue Num Queue Num 8
Packet Buffer System Packet Buffer Capacity 12M 16M
ACL ACL Capacity 2K 4K
Security IP Source Guard IPv4 IP-Source-Guard Capacity 1K
IPv6 IP-Source-Guard Capacity 1K
802.1x base MAC Maximum Entries 1K
DHCP-Snooping Maximum bound entry 1K
Reliability VRRP Maximum Group Num 255
Smart Link Flexlink Num 128
MonitorLink Num 5

Download

S2600 SERIES Datasheet_EN

Related products