S4624-8N L3+ Managed witch, with 24*5G BASE-T , 8*25G Uplinks, Dual Power, Smart Fans

  • 1+1 Redundancy PSU
  • Support Smart Fans
  • Support 10M/100M/1G /2.5G /5G/10G / 25G ports
  • QinQ, BGP, Ipv6

Highlight Features:

  1. QinQ
  2. BGP
  3. OSPF
  4. MLAG
  5. IPv6
  6. VxLan
  7. MPLS
  8. Multi-Gigabit
  9. Layer 3 high-function

Application Scenarios:

  1. Enterprise /Campus Networks
  2. Telecommunication Operators Networks
  3. Data Center Networks
Get a quote  

Description

OVERVIEW

S4624-8N Routing switches, high-performance Layer 3 Ethernet switch with 5G /Multi-Gigabit /25G SFP28 Ports compact 1U form factor. The FOS delivers robust feature support,Provide complete Layer 3 network features.

Built from the ground up with the combination of advanced hardware and software, the switch provides a powerful Layer 3 routing solution for next generation enterprise, Wi-Fi 6 Access, Metro and HCI (Hyper Converged Infrastructure) networks.

 

Based on Carrier Grade High performance chip

S4600 Series routing switches, which are designed based on sixth generation ethernet switching chip. The Carrier Grade high-performance chip which help the S4600 to meet the requirement of Metro/Enterprise/Data Center/HCI networks.

 

Varied Port Types

Support 10M/100M/1G /2.5G /5G/10G / 25G ports to meet different network requirements.

 

System Design for Green and Energy Saving

Intelligent FAN adjustment and real-time power consumption monitoring technology are provided for the cost of maintenance redundancy and help to build a green and energy saving networks.

 

Customized Profile for Different Deployment Scenarios

The Flexible Table Management (FTM) technology offers multiple table size configuration profiles as optimized choices for different network scenarios. Support up to 112K * MAC address tables. Support up to 56K * IP routing tables.

 

Intelligent Ethernet OAM: completed network fault management and performance guaranty

With the IEEE802.1ag and ITU-T Y.1731 end-to-end OAM, Ethernet service providers can monitor the services, survey the end-to end performance and ensure the service quality match the agreement.

  • The fault managementtechnique includes CCM, LTM and LBM. Performance targets include measure for latency and jitter.
  • S4600 Series routing switchesSupport remote management,network monitoring,network fault indication,remote loopback and MIB parameter retrieval according to the standard 802.3ah EFM.

 

Data Center Features

S4600 Series routing switches supports leading edge Data Center features: Priority Flow Control (PFC), explicit Congestion Notification (ECN) and Data Center TCP, etc.

  • Support MLAG (Multi-Chassis Link Aggregation) to aggregate links across different devices. MLAG can build an Active-Active system to improve the reliability of the network links from single board grade to device grade. MLAG use a peer link between to devices to aggregate two devices and make them as one device logically. Ports of two different devices join the aggregate ports together and all port can transmit the data traffic. MLAG need to management the device respectively, but the configurations are easier than stacking, reboot is NOT required after MLAG is configured. Forwarding and configuring are processing on local device, in normal condition the traffic do NOT transmit trough the peer link, the bandwidth of peer link is not the bottleneck of the network and the latency is low.
  • Support overlay technology (include NVGRE/VXLAN/GENEVE etc.). Overlay can make layer2 packets across the layer3 networks by using NVGRE/VXLAN/GENEVE header to encapsulate the entire Ethernet packets. Overlay resolves the problem of MAC table size limitation in traditional layer2 networks, resolves the problem of VLAN id count limitation, and resolves the problem network dynamic adjustment which cannot achieve by VLAN/VPN. Use VXLAN for example, 24 bits VNI identifier can support at most 16777215 logic networks, layer2 networks built by VXLAN can keep the same IP/MAC etc. when move the virtue machine.
  • MLAG and overlay features are also good candidates for switches in data center network.
  • S4600 Series routing switchessupports RPC-API for SDN (Software Defined Network). SDN is a new architecture of network which can substantially simplify the management and maintenance by separating the control plane and data plane of the network.

High Reliability

S4600 is powered by Hot-swappable power modules which supports AC/DC 1+1 redundancy;Fans support 1+1 redundancy;Support Real-time environment monitoring technology to detect the chipset temperature, status of fan and power, etc.

  • Support LACP / ECMP / VRRP / VARP / STP/RSTP/MSTP / Smart Link / BFD / ERPS / G.8031 / G.8032 / Load-Balancing, etc. to protect the network traffic all-around effectively.
  • Patented technology “Sysmon” for CPU status monitoring can take action when system is error.

Outstanding QoS Control

S4600 Series routing switches provides 13 hardware queues per-port (8 unicast queues, 4 multicast queues, and 1 monitor queue).Support multi-stage scheduling technology such as WDRR (Weighted Deficit Round Robin) / SP (Strict Priority) and TD (Tail Drop) / WRED (Weighted Random Early Detection) to prevent congestion. Support flexible queue scheduling mechanism to do the shaping for queue or port traffic.

  • Ingress and egress policer provide intelligent bandwidth monitoring, which support to adjust the granularity according to the port speed. Both srTCM (Single Rate Three Color Marker) and trTCM (Two Rate Three Color Marker) can be supported.

Triple-play Service Support with Bandwidth Guaranty for High Quality Application

S4600 Series routing switches offers high bandwidth for Triple-Play services such as IPTV, video monitoring. The built-in QoS capabilities and flexible queuing technologies guarantee high quality of services.

  • Rich multicast protocol set (IGMP Snooping, IGMP v1/v2, PIM-SM) support up to 2K multicast groups and 4K logical replications per group. With FOS software, IPTV service and multicast latency control are fully supported.

Comprehensive Network Security Policy

S4600 Series routing switches supports subscriber-class / switch-class / network-class security control.

  • IPv4 / IPv6 / MAC ACL can filter IPv4 / IPv6 / Non-IP packet respectively. Besides that, extended IPv4/IPv6 ACL which can match Layer2 / layer3 / layer4 information in one rule is available. The ACLs can apply to physical ports / vlan / port group / vlan group. The members of port group or vlan group share a set of ACLs and save the TCAM resource.
  • ARP Inspection and IP Source Guard features prevent network from malicious ARP attack. Support CPU Traffic Protection, Storm control and CPU load optimization features. Support centralized 802.1x authentication feature to forbidden illegal user accessing network.

Convenient Management features

  • Support varied management interfaces, include console port / inband network ports / outband network port. Support SNMP v1/v2/v3, Support CLI (Command Line Interface), web management, Telnet and FTP connection. Support OAM to make management more convenient, and support SSH2.0, SSL, etc. to ensure security of management.

Datasheet

CHARACTERISTICS

Model S4624-2Z S4624P-2Z S4624-8N S4624-8N
Ethernet Ports 24 * 10/100/1G/2.5G/5GBASE-T

8*25G/10G SFP28

24 * 10/100/1G/2.5G/5GBASE-T

8*25G/10G SFP28

Management Ports 1*Console Port (RJ45)

1* Ethernet Management Port(RJ45)

Power Supplies 2*250W (1+1 Redundancy) Hot-swappable Power Supplies 2*600W (1+1 Redundancy) Hot-swappable Power Supplies 2*250W (1+1 Redundancy) Hot-swappable Power Supplies 2*600W (1+1 Redundancy) Hot-swappable Power Supplies
Fans 2*Hot-swappable Fan Module (2 Fans Per Module) 2*Hot-swappable Fan Module (2 Fans Per Module) 2*Hot-swappable Fan Module (2 Fans Per Module) 2*Hot-swappable Fan Module (2 Fans Per Module)
Airflow Front-to-Rear
Flash Memory 8GB EMMC (OS)

4MB SPI Flash(Boot)

DRAM 2GB
Switching Capacity 640Gbps
Packet Forward 655Mpps
MAC address 98304
Weight (kg) 6.96
Size 442mm*356.5mm*43.6mm
Operating Temperature 0ºC to 45ºC
Storage Temperature -40ºC to 70ºC
Operating Humidity 10% to 90% (Non-condensing)
Storage Humidity 0 to 95% (Non-condensing)
Temperature Alarm 50ºC

SOFTWARE FEATURE LIST

Software Features ● Support
○ Not Support
Feature Description EB License MS License MA License
Type Sub Type Feature
Ethernet basic features Interface Interface Ethernet interface operating modes(full duplex, half duplex, and auto-negotiation)
Ethernet interface operating rates
Jumbo Frame
port-xconnect
Flow-control Flow-control tx/rx
Storm-control Port based storm-control
VLAN based storm-control
Port-block Port-block(know/unknown unicast; know/unknown multicast/broadcast)
Port-isolate L2/L3/All  Port-isolate
Uni-direction isolate
L2 Protocol Tunnel L2 protocol tunnel (Support CDP/CFM/DOT1X/LLDP/SLOW-PROTO/STP/VTP)
Forward mode Store-and-forward
Cut-through
VLAN VLAN Access mode Access/Trunk
Default VLAN
VLAN Classification VLAN Classification(port based/mac based/IP based/protocol based)
QinQ Basic QinQ
Selective QinQ
VLAN Mapping(1:1 VLAN Translation)
VLAN Mapping(N:1 VLAN Translation)
VLAN Statistics VLAN Statistics
Private VLAN Private VLANv
Voice VLAN Voice VLAN
Guest VLAN Guest VLAN
MAC MAC Address Table Automatic learning and aging of MAC addresses
Refresh the FDB based on ports and vlans
Hardware Learning
Static and dynamic  MAC address entries
Blackhole MAC
MAC Flapping detect MAC Flapping detect
Port bridge Port Bridge
LAG Link aggregation Static-LAG & LACP
LAG load balance(SLB)
LAG load balance(DLB)
LAG load balance(RR)
LAG Self-healing
Link aggregation weighting
Ethernet Ring protection features xSTP STP Spanning-Tree Protocol
RSTP Rapid Spanning-Tree Protocol
MSTP Multi-instance Spanning-Tree Protocol
Spanning-Tree Protocol Protection BPDU Filter/Guard
Root Guard
Loop Guard
Anti TC-BPDU attack
ERPS ERPS Single ERPS ring
tangent ERPS rings
intersecting ERPS rings
compatible with RRPP
G.8031 G.8031 G.8031(Ethernet Linear Network Protection)
G.8032 G.8032 G.8032 V1 & V2
Single Ring
Sub Ring
Loop back Detect Loop back Detect Loopback-detection
Layer2 Multicast Layer2 Multicast IGMP snooping IGMPv1/v2/v3 Snooping
Fast leave
Static IGMP snooping group
MVR MVR(Multicast VLAN Registration)
IPv4 Forwarding ARP ARP Static and dynamic ARP entries
Aging of ARP entries
Gratuitous ARP
ARP proxy basic ARP-Proxy
local ARP-Proxy
IPv4 Static Routes IPv4 Static Routes IPv4 Static Routes
Black hole Routes
co-work with IP SLA
VRF(Virtual Routing and Forwarding)
uRPF check
RIP RIP v1/v2
OSPFv2 OSPF v2
IS-IS IS-IS
segment-routing based on IS-IS protocol extension
BGP IBGP
EBGP
Graceful-Restart helper
Route policy Route-map
IPv4 prefix-list
PBR PBR(Policy-based Routing)
ICMP ICMP redirect
ICMP unreachables
ECMP ECMP(SLB)
ECMP(DLB)
ECMP(RR)
ECMP Self-healing
IP unnumbered IP unnumbered
IPv4 Multicast Routing IGMP IGMP v1/v2/v3
IGMP-proxy
IGMP SSM mapping
PIM PIM-SM
PIM-SSM
PIM-DM
IPv6 Forwarding IPv6 Basic Protocol ICMPv6 ICMPv6
NDP NDP
PMTU PMTU
IPv6 Unicast Routing IPv6 Static Routes IPv6 Static Routes
IPv6 Blackhole Routes
RIPng RIPng
BGP4+ BGP4+
OSPFv3 OSPF v3
IS-IS IS-IS
VRRP v3 VRRP v3
Pv6 Multicast Routing MLD v1/v2 MLD v1/v2
MLD v1/v2 snooping MLD v1/v2 snooping
MVR6 MVR6
PIM-SM v6 PIM-SM v6
IP Tunnel IPv6 over IPv4 Tunnel IPv6 over IPv4 tunnel
6to4 Tunnel 6to4 tunnel
ISATAP Tunnel ISATAP tunnel
IPv6 DHCPv6 DHCPv6 Relay
DHCPv6 snooping
IPv6 Prefix List IPv6 Prefix-list
Device reliability features BFD BFD Detecting BFD for static routes
Detecting BFD for OSPFv2
Detecting IS-IS BFD. Procedure
Detecting BGP BFD
Detecting BFD for VRRP/Track
Detecting BFD for the PBR
VRRP VRRP VRRP
Track for VRRP
Smart link Smart link multi-instance
load balance
Multi-Link
Monitor-link
MLAG MLAG MLAG basic
MLAG orphan Port
Ethernet OAM EFM EFM (802.3ah) Auto detection
Network fault detection
Network fault handle
remote loop back
CFM CFM (802.1ag) Hardware CCM detect
Linktrace
Loopback
Y.1731 Y.1731 Latency and Jitter measure
QoS QoS Traffic classification Traffic classification based on COS/DSCP (simple classification)
Traffic classification based on ACL ( complex classification)
Traffic classification based on inner header of the tunnel packets
Traffic behaviors Queue scheduling
Remark the priority fields(COS/DSCP) of the packet based on ACL
Remark the priority fields(COS/DSCP) of the packet based on ACL
Flow redirection
Flow mirror
Traffic policing Traffic policing based on direction(in/out)  of Port
Traffic policing based on direction(in/out) of VLAN
Traffic policing based on direction(in/out) of flow
Traffic policing based on direction(in/out) of aggregated flow
Traffic shaping Queue based traffic shaping
Port based traffic shaping
Congestion management SP(Strict Priority)scheduling
WDRR(Weighted Deficit Round Robin)scheduling
SP + WDRR mixed scheduling
Congestion avoidance TD(Tail Drop)
WRED(Weighted Random Early Detection)
Traffic statistics Packet counts and bytes statistics based on traffic classification
Packet counts and bytes statistics based on the color after traffic policing
Forwarded and discarded packet counts and bytes statistics
ECN (Explicit congestion) Tail Drop-based ECN tag
WRED based ECN tagx
Shape rate speed based ECN tagx
Network virtualization VARP Virtual gateway VARP(Virtual-ARP)
Support IPv4
Support IPv6
VARP support subnet
Tunnel VxLAN Manual configure VxLAN tunnel
VxLAN distributed gateway
VxLAN active-active access
VxLAN realize Overlay network
L2 Protocol packet pass through
Modify the DSCP of the outer VxLAN header
Edit DSCP in VxLan outer header
BGP EVPN
Support to enable/disable overlay split horizon per-VNI
Support IPv4
Support IPv6
GRE Tunnel GRE Tunnel
NVGRE Tunnel NVGRE Tunnel
GENEVE Tunnel GENEVE Tunnel
Network convergence DCB DCBX LLDP support DCBX TLV
PFC PFC
Metropolitan Network IPRAN LDP LDP
MPLS Forwarding MPLS Forwarding
VPWS VPWS
VPLS VPLS
MPLS OAM MPLS OAM
MPLS Stats MPLS Stats
L2VPN L2VPN
L3VPN L3VPN
ACL MPLS ACL
QoS MPLS QoS
SR Segment-routing based on MPLS
Safety and management System Security SSH SSH v1/v2
RSA Key generation
RADIUS RADIUS
TACAS+ TACAS+
AAA Authentication
Authorization
Accounting
Dot1x Port based dot1x
MAC based dot1x
Guest VLAN
ACL MAC/IP ACL
Basic Mode ACL
Port-group ACL
VLAN-group ACL
IPv6 ACL
ACL UDF
Global ACL
Time Range
ARP inspection ARP inspection
IP source guard IP source guard
Port Security Limitation on MAC address learning on interface
VLAN Security Limitation on MAC address learning on VLAN
Control Plane Policy (COPP) Black list/wihte list
Rate limit
CPU Traffic Limit CPU Traffic Limit
Prevent DDOS attack Prevent DDOS attack (ICMP Flood/Smurf/Fraggle/LAND/SYN Flood)
Login filter Telnet/SSH ACL filtering
Telnet/SSH IPv6 ACL filtering
Link-Flapping detection Link-Flapping detection
Network Management DHCP DHCP Server
DHCP Relay
DHCP snooping
DHCP Client
DHCP option 82
DHCP option 252
RMON RMON
sFlow sFlow v4/v5
IP SLA Support IPv4
Support IPv6
Support Track
IPFIX IPFIX
Latency/Buffer monitor Latency monitor
Buffer monitor
EFD Elephant flow detection
NTP NTP(Network Time Protocol)
PTP(IEEE 1588 ) Transparent clock (TC)
Errdisable Errdisable detection and recovery
DNS Static DNS Client
LLDP LLDP
Configuration and maintenance Terminal Services Command Line Interface Configurations through CLI (Command Line Interface)
Help information Banner configuration
Help information in English
Terminal Services Vty Terminal service
Console Terminal service
Configuration Management Management interface In-band management interface and configuration
Out-band management interface and configuration
User privilege management privileged user priority and privileged commands
SNMP Network management based on SNMPv1/v2c/v3
Public and private MIB
Public and private Trap
WEB Configuration and management based on WEB UI
RPC-API Configuration and management based on RPC-API
Smart config Smart Config(Automatically configuration when system start)
OVSDB Configuration and management based on OVSDB
Configuration and management based on RPC-API change the system specifications by choose different STM Profiles
License control Feature configuration based on License
Netconf Netconf
Restore factory default Restore factory default configuration
File System File system File system(support directory and file management)
Upload and download Upload and download files through FTP or TFTP
Upload and download files in SCP mode
File transfer in Xmodem mode
Diagnosis and Maintenance Debug per-module Debug features
ICMP Debug
BHM Software process monitor: BHM(Beat Heart Monitor)
Hardware Watch Dog
VCT VCT(Virtual Cable Test)
System diagnostics Detailed Diagnostic-information collection
Reboot Manual reboot
Schedule Reboot
Reboot Information logging
Network diagnostics Ping
IPv6 Ping
Traceroute
Network diagnostics CPU usage display and  alarm
Memory  usage display and  alarm
Supports CPU/ memory historical display
Supports CPU/ memory historical display
User operation logs
Management of logs, alarms, and debugging information
Support interface bandwidth usage alarms
Support Log servers with IPv4 addresses
Support Log servers with IPv6 addresses
Mirror Port mirror
Flow mirror
Remote mirror
Multi-destination mirror(m:n)
Use CPU as mirror source
Use CPU as mirror destination and analyze packet
ERSPAN
CPU statistics To CPU/From CPU packets statistics
L2 Ping layer2 network connectivity detection – L2Ping (MAC Ping/Trace)
UDLD UDLD(Unidirectional Link Detection)
Unidirectional Unidirectional forwarding of the fiber
Loop back port loop back
hardware loop back(internal/external)
System time Time configuration
Timezone
Version upgrade System software upgrade Local upgrade
Upgrade from TFTP
Uboot upgrade Upgrade the Uboot online

 

Download

S4600 Series Switches Datasheet _EN