S9532 Data Center Switch, with 32*800G OSFP, Dual Power Modules, 4*Smart Fan Modules

  • High-density 800G switch, 32*800G OSFP
  • Redundant hot-swappable power and fans ensure continuous stability
  • Support VXLAN/EVPN tunnel technology, unlimited data transmission
  • RDMA end-to-end data forwarding, build a lossless network without packet loss
  • Support MLAG, cross-device link aggregation technology

Highligh Features:

  1. EVPN
  2. BGP
  3. OSPF
  4. MLAG
  5. IPv6
  6. VxLAN
  7. RDMA

Application Scenarios:

  1. Supercomputing
  2. Data Center Networks
  3. AI/ML Networks
Get a quote  

Description

OVERVIEW
System Design for Green and Energy Saving

Intelligent FAN adjustment and real-time power consumption monitoring technology are provided for the cost of maintenance redundancy and help to build a green and energy saving network.

Customized Profile for Different Deployment Scenarios

The Flexible Table Management (FTM) technology offers multiple table size configuration profiles as optimized choices for different network scenarios. Support up to 120K MAC address tables. Support up to 60K IP routing tables.

Intelligent Ethernet OAM: completed network fault management and performance guaranty

With the IEEE802.1ag and ITU-T Y.1731 end-to-end OAM, Ethernet service providers can monitor the services, survey the end-to end performance and ensure the service quality match the agreement.

The fault management technique includes CCM, LTM and LBM. Performance targets include measure for latency and jitter.

S9500 Support remote management,network monitoring,network fault indication,remote loopback and MIB parameter retrieval according to the standard 802.3ah EFM.

Virtual Network and Intelligent Lossless Network Features

S9500 support leading edge technology: Priority Flow Control (PFC), explicit Congestion Notification (ECN), etc.

Support MLAG (Multi-Chassis Link Aggregation) to aggregate links across different devices. MLAG can build an Active-Active system to improve the reliability of the network links from single board grade to device grade. MLAG use a peer link between to devices to aggregate two devices and make them as one device logically. Ports of two different devices join the aggregate ports together and all port can transmit the data traffic. MLAG need to management the device respectively, but the configurations are easier than stacking, reboot is NOT required after MLAG is configured. Forwarding and configuring are processing on local device, in normal condition the traffic do NOT transmit trough the peer link, the bandwidth of peer link is not the bottleneck of the network and the latency is low.

Support overlay technology (include NVGRE/VXLAN/GENEVE etc.). Overlay can make layer2 packets across the layer3 networks by using NVGRE/VXLAN/GENEVE header to encapsulate the entire Ethernet packets. Overlay resolves the problem of MAC table size limitation in traditional layer2 networks, resolves the problem of VLAN id count limitation, and resolves the problem network dynamic adjustment which cannot achieve by VLAN/VPN. Use VXLAN for example, 24 bits VNI identifier can support at most 16777215 logic networks, layer2 networks built by VXLAN can keep the same IP/MAC etc. when move the virtue machine.

S9500 supports RPC-API for SDN(Software Defined Network). SDN is a new architecture of network which can substantially simplify the management and maintenance by separating the control plane and data plane of the network.

High Reliability

S9500 are powered by Hot-swappable power modules which supports AC/DC 1+1 redundancy;Fans support 3+1 redundancy;Support Real-time environment monitoring technology to detect the chipset temperature, status of fan and power, etc.

Support LACP / ECMP / VRRP / VARP / STP/RSTP/MSTP / Smart Link / BFD / ERPS / G.8031 / G.8032 / Load-Balancing, etc. to protect the network traffic all-around effectively.

Patented technology “Sysmon” for CPU status monitoring can take action when system is error.

Outstanding QOS Control

S9500 provides 10 hardware queues per-port (8 unicast queues, 1 multicast queues, and 1 monitor queue).Support multi-stage scheduling technology such as WDRR (Weighted Deficit Round Robin) / SP (Strict Priority) and TD (Tail Drop) / WRED (Weighted Random Early Detection) to prevent congestion. Support flexible queue scheduling mechanism to do the shaping for queue or port traffic.

Ingress and egress policer provide intelligent bandwidth monitoring, which support to adjust the granularity according to the port speed. Both srTCM (Single Rate Three Color Marker) and trTCM (Two Rate Three Color Marker) can be supported.

Triple-play Service Support with Bandwidth Guaranty for High Quality Application
S9500 offers high bandwidth for Triple-Play services such as IPTV, video monitoring. The built-in QoS capabilities and flexible queuing technologies guarantee high quality of services.

Rich multicast protocol set (IGMP Snooping, IGMP v1/v2, PIM-SM) support up to 2K multicast groups and 4K logical replications per group. IPTV service and multicast latency control are fully supported.

Comprehensive Network Security Policy

S9500 supports subscriber-class / switch-class / network-class security control.

IPv4 / IPv6 / MAC ACL can filter IPv4 / IPv6 / Non-IP packet respectively. Besides that, extended IPv4/IPv6 ACL which can match Layer2 / layer3 / layer4 information in one rule is available. The ACLs can apply to physical ports / vlan / port group / vlan group. The members of port group or vlan group share a set of ACLs and save the TCAM resource.

ARP Inspection and IP Source Guard features prevent network from malicious ARP attack. Support CPU Traffic Protection, Storm Control and CPU load optimization features. Support centralized 802.1x authentication feature to forbidden illegal user accessing network.

Convenient Management features

Support varied management interfaces, include console port / in-band network ports / out-of-band network port / USB port. Support SNMP v1/v2/v3, Support CLI (Command Line Interface), web management, Telnet and FTP connection. Support OAM to make management more convenient, and support SSH2.0, SSL, etc. to ensure security of management.

DATASHEET

CHARACTERISTICS:

Product Name S9532
Ethernet Ports 32*800G OSFP
Out-of-band

Management

1*Console (RJ45)

1* 1000Base-T(RJ45)

1* USB Store

Cooling 4* hot-swap Fan Modules
Airflow Front to rear
Power Supply Dual hot-swap CRPS
FLASH 8GB
DRAM 2GB
Switch capacity 51.2Tbps
Throughput 38.09Gpps
Dimension(W*D*H) TBD
Weight TBD
Running Temperature 0ºC to 45ºC
Store Temperature -40ºC to 70ºC
Running Humidity 10% to 90% (No condensation)
Store Humidity 0 to 95% (No condensation)
High-temperature alarm 50ºC

SOFTWARE FEATURES

Feature Function description
Forward mode Support store-forward mode and cut-through mode
Ethernet features Support auto-negotiation of port duplex mode

Support auto-negotiation of port speed

Support Jumbo Frame

Support Flow Control

Support Storm Control

Support Port-block

Support Port-isolate

Support L2 Protocol Tunneling

VLAN features Support 4096 VLANs

Support VLAN access mode: Access /Trunk

Support Default VLAN

Support VLAN Classification

Support basic QinQ, selective QinQ and VLAN Mapping

Support VLAN statistics

Support Private VLAN

Support Guest VLAN

Support Voice VLAN

MAC Address Table Support static MAC address

Support dynamic MAC address learning and aging

Support hardware learning

Support black hole MAC address

Support MAC Flapping detect

Link aggregation Support Static Link aggregation

Support LACP

Support Static load balancing

Support dynamic load balancing (DLB)

Support Self-healing

Reliability features Support STP/RSTP/MSTP protocol

Support STP Protocol Protection (BPDU Filter/Guard, Root Guard, Loop Guard, Anti TC-BPDU attack)

Support Single ERPS ring / tangent ERPS rings / intersecting ERPS rings

Support ERPS compatible with RRPP

Support G.8031

Support G.8032

Support port Loopback Detect

Support BFD

Support VRRP

Support MLAG

Support Ethernet OAM: EFM/CFM/Y.1731

Support Software class process monitoring(Sysmon)

Support Hardware Watch Dog

ARP features Support static ARP

Support dynamic ARP leaning and aging

Support Gratuitous ARP

Support basic ARP-Proxy and local ARP-Proxy

IPv4 forwarding Support IPv4 static routes

Support IPv4 static routes co-work with IP SLA

Support VRF

Support host route leaking cross VRFs

Support uRPF check

Support RIPv1, RIPv2

Support OSPFv2

Support IS-IS

Support BGP

Support Route-map and Prefix list

Support Policy-based Routing ( PBR )

Support ICMP redirect, Support ICMP unreachables

Support ECMP

IPv6 forwarding Support ICMPv6

Support NDP

Support PMTU

Support IPv6 static routes

Support RIPng

Support OSPFv3

Support IS-IS

Support BGP4+

Support IPv6 over IPv4 Tunnel

Support 6to4 Tunnel

Support ISTAP Tunnel

Support DHCPv6

Support IPv6 prefix list

Multicast features Support IGMP v1/v2/v3

Support IGMP agent

Support IGMP SSM Mapping

Support PIM-SM,PIM-SSM,PIM-DM

Support MLD v1/v2, MLD v1/v2 snooping

Support MVR and MVR6

Support PIM-SM v6

Metro features Support LDP

Support MPLS Forwarding

Support VPWS

Support VPLS

Support MPLS OAM

Support MPLS Stats

Support L2VPN/L3VPN

Support MPLS ACL

Support MPLS QoS

Network Virtualization features Support VARP (IPv4/IPv6)

Support VXLAN (IPv4/IPv6)

Support GRE Tunnel

Support NVGRE Tunnel

Support GENEVE Tunnel

Support EVPN

Intelligent Lossless Network Features Support DCBX

Support priority-based flow control (PFC)

Support PFC Deadlock detection

QOS features Support traffic classification based on COS/DSCP (simple classification)

Support traffic classification based on ACL ( complex classification)

Support queue scheduling based on traffic classification

Support Remark the priority fields(COS/DSCP) of the packet

Support flow redirection

Support flow mirror

Support traffic policing

Support traffic shaping

Support traffic statistics

Support SP(Strict Priority) scheduling

Support WDRR (Weighted Deficit Round Robin) scheduling

Support SP + WDRR mixed scheduling

Support TD(Tail Drop)

Support WRED (Weighted Random Early Detection)

Support ECN tags based on TD and WRED

Support show used state of interface buffer

Security features Support SSH

Support Radius

Support TACACS+

Support AAA

Support port based dot1x and MAC based dot1x

Support configure dot1x Guest via command or Radius server

Support access control list(ACL)

Support traffic classification based on source and destination IP / source and destination MAC / source and destination layer for protocol number / VLAN ID

Support ACL matching User defined fields (UDF)

Support ACL active based on Time-Range

Support ARP inspection

Support IP source guard

Support port security to limit the MAC address learning on interface

Support VLAN security to limit the MAC address learning on interface

Support CoPP (Control Plane Protect) black & white list and rate limit features

Support CPU Traffic Limit

Support Prevent DDOS attack

Support ACL filtering Telnet/SSH login

Support Link-Flapping detection

Configuration and maintenance Support DHCP Server

Support DHCP Relay

Support DHCP Snooping

Support DHCP Client

Support DHCP Option82

Support RMON

Support sFlow

Support IP SLA

Support IPFIX

Support Latency/Buffer Monitor

Support EFD (Elephant Flow Detection)

Support NTP

Support PTP (TC/OC/BC)

Support port Errdisable state detection and recovery

Support configure static DNS client

Support LLDP

Support port loopback

Support hardware loopback (internal/external)

Support to configure system time

Support to configure time zone

Debugging features Support to Debug based on modules

Support CPU/memory usage display and alarm

Support Device temperature/PSU/FAN/status display and alarm

Support user operation logs

Support Management of logs, alarms, and debugging information

Support VCT (Virtual Cable Test)

Support detailed diagnostic-information collection

Support reboot information logging

Support network diagnostics (ping/traceroute)

Support mirror: support use port/VLAN/CPU as mirror source

Support use port/port group/VLAN/CPU as mirror destination

Support ERSPAN

Support to CPU/From CPU packets statistics

Support L2 ping

Support UDLD(Unidirectional Link Detection)

Management features Support in-band and out-of-band management ports

Support privileged user priority and privileged commands

Support Network management based on SNMPv1/v2c/v3

Support Public and private MIB

Support Public and private Trap

Support Configuration and management based on WEB UI

Support Configuration and management based on RPC-API

Support SmartConfig(Automatically configuration when system start)

Support OVSDB

Support change the system specifications by choose different STM Profiles

Support feature configuration based on License

Support restore factory default configuration

Support manual/schedule reboot

Support upgrade with the local image file/remote TFTP server

Support online upgrade Uboot

Support Netconf

File system Support file system to manage the files and directories

Support upload/download files via FTP/TFTP

Support transmit files via Xmodem